Expert MB1 (AT) SDR

  • Da meine Sparbüche wieder einmal gut gefüllt war, habe ich mir den Expert MB1 (AT) zu gelegt..


    Leider fast 7000 Eur teuer. Meine Frau hat mich beinahe erschlagen :-)


    Nun denn.
    Er empfängt von (4,5 khz) 9 khz durchgehend bis 200 (511,999.999) Mhz in allen Modes..


    Incl DUAL RX an max 6 verschiedenen schaltbaren Antennen Aus/Ein gängen.


    Sendemässig kann er als CE Modell max HF 100 Watt/ VHF/UHF 50 Watt
    Als Non CE Modell schafft er max 2*250 Watt HF , sowie in VHF/UHF max 100 Watt


    Bei 13,8V /max 62 amps
    Oder 90-294 Volt input.


    Hervorzuheben ist der eingebaute Windows10 bzw Linux pc.
    In meiner Aussattung hat er einen Intel I7 / 64 gb Ram / 2 TB SSd auf Sonderwunsch eingebaut


    Nun zum Empfang.
    Solch ein sauberes klares Signal habe ich selbst bei meinen R&S Geräten bisher kaum ausgemacht..


    Er zeigt max 80 Mhz !!! Bandbreite in Realtime an, wo man sich dann auf Wunsch einen Bereich in Echtzeit raus zoomt...


    Die zwei interen echten Hardware Empfänger tun ihr übriges..


    Das Gerät lässt kaum einen Wunsch offen ;)


    Ich bin hell auf begeistert..


    Ich habe grade mal durch die Bänder gesucht und direkt einen Russichen Zahlensender mit Vollausschlag und absolut klarer Modulation bei 13,566.8160 Mhz gefunden


    Ich habe mal Wavecode und Krypto 500 in dem MB1 installiert und bin begeistert. Klappt alles Prima..


    Was soll ich sagen bei den "Daten"... https://amd.co.at/anti/afu/Expert_MB1_AT/mb1d.jpg


    Hier vorerst ein paar Bilder https://amd.co.at/anti/index2.php?afu/Expert_MB1_AT/


    Und ein paar Videos, ( Ohne gute Antenne ) von gestern Abend.


    Die bekannte Stanag 4285 Schleife auf 8,453.234 Mhz



    Ein wenig auf 40m



    DW Rtty



    und zu guter letzte DWD WE FAX



    Die Tage dann mal ein paar neue Videos


    (Anhang RU Zahlensender heute )


    gruss

  • SPECS SUBJECT TO UPDATES AND CHANGES


    The HF/6M/VHF SunSDR-MB1 transceiver is a new ultra modern concept of HAM
    standalone radio based on new DUC/DDC Software Defined Radio
    technologies with embedded PC, comfortable and easy operation of a
    traditional transceiver. One box contains: full PC (Micro-ITX PC, Intel
    Core i5 CPU, full-blown Windows 8 or Linux Ubuntu), transceiver's
    hardware core based on high permonace HF/6M/VHF
    DUC/DDC transceiver,
    125W PA, PA LPF, ATU, Antenna switch, WLAN (optional) for wireless
    connections, 7" high quality IPS display, fully reprogrammable front
    panel(buttons and all knobs), àlso additional HDMI connector for
    external big display etc.


    Many radio amateurs use PC with the
    classical transceiver. In one case it is notebook, in other – desktop
    computer. Connection between those two devices is done in accordance
    with the User's preference. Somebody connects additional USB interfaces,
    somebody solder the wire harness. When there appear a question to go to
    contest station with the tuned working station, moving of the equipment
    becomes “the pain in the neck”. In such a case it is desirable to have
    everything in one box. Monoblock SunSDR-MB1 solves this problem by 100%.
    The DUC/DDC transceiver SunSDR-MB1 - this is a new generation of
    amateur radio. Transceiver combines a classic design, accumulated many
    decades, with the most advanced DUC/DDC SDR-technologies - direct
    conversion and synthesis of radio signals, and full-featured modern
    computer with a CPU Intel Core i5. Operator receives a fully functional
    workstation in one case, which is started by pressing just a one button.
    All the connections can be done with a help of virtual audio cables and
    COM-ports, connecting the second monitor, mouse, keyboard and also to
    control the enjoyable radio by knobs and buttons on the transceiver's
    face panel.


    Opportunities


    Uses ADC with sample rate 160 MHz and resolution 16 bit
    Two independent receive channels with bandwidth 312 kHz
    Record air stations with the bandwidth up to 312 kHz and an opportunity to reproduce it later
    Opportunity to receive in Nyquist zones up to 800 MHz (necessary to set additional external filters )
    Broad band view up to 80 MHz
    High quality audio DAC with the precision 24 bit fro decreasing signal delays
    Qualitative IPS 7" display with the resolution 1280x800
    Connector for controlling external devices, 8 programmable transistor switches
    Interface with PC – local network 100 Mbps
    Input of the external reference oscillator with the frequency 10 MHz
    Small dimensions and respectively light weight
    ExpertSDR2 software in two variants, for Desktop and for monoblock
    Opportunity to set any other software by User


    Main features


    Independent receive path with Digital Direct Conversion(DDC)
    Separate independent transmit path with Digital Up Conversion(DUC)
    Full duplex or half duplex mode*
    Output power HF 100W, VHF 50W
    Two independent receiver channels with bandwidth up to 312 kHz and two sub-receivers in each channel.
    Antenna switch for two HF antennas
    Connector for controlling external devices, 7 powerful switches with open collector
    Connector for connecting mobile antenna 9310 by Stealth Telecom
    Automatic Tuner Unit for HF band: Available as option
    ALC input for connecting external power amplifier
    Four programmable PTT outputs for independent external PA control
    COM port for connecting external devices(power amplifiers, rotators, external PC etc.)
    Opportunity to insert BPF in HF frontend via RX IN and RX OUT connectors
    Embedded suboctave band pass filters
    Opportunity to connect VHF transverters
    Using transceiver as a receiver for measurements
    Using transceiver as a signal generator (output DAC OUT)
    Frequency synchronization from 10 MHz reference oscillator
    Very small delay in CW mode (about 10 msec)
    Opportunity to use transceiver in SO2R mode
    Opportunity of remote control. PTT
    foot switch and CW key are connected to E-Coder SDR-control panel.
    Headset and E-Coder panel are connected to remote PC.


    * Full duplex mode is supported by
    the transceiver's hardware, but is not done software yet. This mode will
    be supported in the future releases of the program ExpertSDR2.


    SunSDR-MB1 also has a full scale computer on the basis of Intel Core i5 processor, which provides the following opportunities:


    Install digital communications software
    Contest loggers and magazines
    Connecting two CW Skimmers to two independent receiving channels on different bands
    Opportunity to connect transceiver to LAN or WAN Internet
    Work with internet browser, internet clusters and other opportunities (e-mail, Skype, ICQ, TV, etc.) connected with Internet
    Viewing and listening audio and video files
    Watching TV via USB-TV receivers
    Opportunity to connect external display, mouse and keyboard
    And many other opportunities limited only by your fantasy. All that inside one SunSDR-MB1 transceiver


    Embedded PC's parameters


    Mother board of thin Mini-ITX Form Factor
    CPU Intel Core i5 3.0GHz
    RAM 4GB
    SSD disk drive, 60GB
    4 ports USB3.0 on the rear panel and 2 ports USB 2.0 on the front panel of the receiver
    HDMI and DPORT for connecting external monitors
    LAN connector 1Gb


    Application area


    Full-function radio amateur transceiver
    Mobile contest-station
    Remote receipt point for the contests and other applications
    Spectrum analyzer with the bandwidth up to 80MHz
    Work with the external programs of digital connection types, CW skimmer, etc.



    gruss

  • HALLO Antivirus,


    Schön das du den MB1 ausprobieren kannst. Ganz im Gegenteil zu Deinen Erfahrungen soll ANGEBLICH sogar ein Händler wegen technischer Problemen aktuell vom Verkauf abraten. Kannst Du das nachvollziehen?


    Grüsse
    Andreas